Zoom H4n With Ipad Garageband

What is Audiobus? — Audiobus isan award-winning music app for iPhone and iPad which lets you useyour other music apps together. Chain effects on your favouritesynth, run the output of apps or Audio Units into an app likeGarageBand or Loopy, or select a different audio interface outputfor each app. Route MIDI between apps — drive asynth from a MIDI sequencer, or add an arpeggiator to your MIDIkeyboard — or sync with your external MIDI gear.And control your entire setup from a MIDI controller.

Zoom H4n With Ipad Garageband Download
Zoom H4n Accessory Pack

By the way, if you have an iPad, this discussion is largely moot. Apple's free Logic Remote app is an excellent control surface for Garageband too. You can control everything the Zoom would do (if it could do what it should do) and much more. The only downside is the knobs and faders are virtual, not physical. To clarify, the Zoom H4n still needs a powered USB and batteries to work with CCK or it's ok with batteries and CCK? Looking at portable audio interfaces for iPad. Want something relatively inexpensive with 4 XLR inputs and can be USB / battery powered.

Download on the App Store

Audiobus is the app that makes the rest of your setup better.

Zoom H4n With Ipad Garageband Download

Zoom’s new Livetrak L-12 could be the only box you need to turn your iPad into a mobile music studio. In one unit, the L-12 combines a mixer, a 12-track recorder, and an interface that lets you.
How to split stereo recording from Zoom H4n audio decks into mono tracks with Audacity for editing in any digital audio workstation (DAW).
Connect your Zoom H4n Microphone to Garage Band - Record audio straight into Garage Band through USB.Cable USED in video: Zoom USB Type A Male to Type B M.

in Off-topic

Hi,

Zoom H4n Accessory Pack

I thought this may be helpful for some folks.

I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.

Of course, I havent extensively tested every scenario but this is a goo start.

Comments

Thanks for reporting. What model device do you have?
Thats one thing that drives me crazy about the Zoom H4n Pro. It has to be used with a powered usb hub. I don't have the wall wart for it so I cant test that but I would assume since it is battery operated that it work straight into the CCK, nope. I did just discover that if you have the CCK being charged via a USB3 port, it will work but the Zoom still needs batteries.
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
This is my finding too. Even though their docs says otherwise it’s working great. I love my h6!
@Ben said:
Thanks for reporting. What model device do you have?
I have the iPad Pro 2018 12.9 256 GB.
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
@Ben said:
Thanks for reporting. What model device do you have?
@Ben said:
Thanks for reporting. What model device do you have?
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
Hi there,
Has anybody tried using Garageband iOS/iPad Pro with the H6? I’m using the new Hyperdrive for iPad as an interface but can only use the H6 (in audio interface mode) in a “stereo’ mix mode, and not as individual audio tracks-to-inputs. Which of course is what I want to do.
I’m wondering - maybe using the Hyperdrive is the problem? What is everyone using as an interface; the USB -C camera connection kit? (Assuming we are still talking about the 2018 iPad Pro).
Or perhaps I need to look into another app as my “DAW”?
Any help is appreciated - Thanks!
@robotbarbarian maybe you mean hyperdrive as USB hub...?! If so, then yes, definitely the hyper crap is the problem. I have it too and it’s not capable of midi and some of my 3.5mm jacks are not recognized. I got first a cheap amazon hub that does the job completely. Maybe you and i get to contact the support again and they get their act together and work on another FW update to make it work as supposed!!?
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
Also ...Zoom H5 works too on ios
Speaking of Zooms (!) ,the old zoom H2 works thru hub only, and the R16 doesn't work at all ...
Can you explain what exactly is meant by multitrack interface? I think i have an imagination but I cant wrap my head around the H5/H6 being such a device... thanks guys!
@hisdudeness said:
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
Also ...Zoom H5 works too on ios
Zoom H1n also works on IOS as a audio interface and as a Card Reader, and is powered by IOS. Bought one last week for €79,-
@david_2017 said:
Can you explain what exactly is meant by multitrack interface? I think i have an imagination but I cant wrap my head around the H5/H6 being such a device... thanks guys!
@hisdudeness said:
@geophilips said:
Hi,
I thought this may be helpful for some folks.
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
Of course, I havent extensively tested every scenario but this is a goo start.
Also ...Zoom H5 works too on ios
I assuming the original post, meant multi channel/track audio interface, which Zoom H5 is perfectly capable
Shows up nicely in AUM
@david_2017
It could be referred to as a 'USB hub' seeing that the only real way the Hyperdrive is going to communicate with the iPad (albeit USB-A/USB-C). I used the term 'audio interface' first, because that is the mode that the H6 offers to communicate as a full duplex device. Also, that is a common term used in audio recording (mainly with the use of computers) for interfacing audio components.
I have no problem getting MIDI to work. I'm using an Akai MIDI controller and it's interfaced via USB-B to USB-C going into the Hyperdrive. No configuring or the need for Audiobus - it just works! Crazy! Haha
Last night I was able to make more progress toward getting this system of mine to work. I was able to configure (3) tracks in Audiobus and assign in Garageband coming from H6 and Hyperdrive. I got levels on all tracks and was able to 'record' them'. Though Garageband showed that there was recording going on, the actual audio was not recorded. A small step forward. Audiobus does recognize the H6 though which is something I had not seen before.
The way I've seen it done online was someone using the H5 and Garageband (and no Audiobus) with the camera connection kit and they were able to record individual tracks simultaneously.
All,
I'll pose the question again - what are people using as an interface with the iPad? I'm using the 2018 iPad Pro 12.9'
@robotbarbarian said:
@david_2017
It could be referred to as a 'USB hub' seeing that the only real way the Hyperdrive is going to communicate with the iPad (albeit USB-A/USB-C). I used the term 'audio interface' first, because that is the mode that the H6 offers to communicate as a full duplex device. Also, that is a common term used in audio recording (mainly with the use of computers) for interfacing audio components.
I have no problem getting MIDI to work. I'm using an Akai MIDI controller and it's interfaced via USB-B to USB-C going into the Hyperdrive. No configuring or the need for Audiobus - it just works! Crazy! Haha
Last night I was able to make more progress toward getting this system of mine to work. I was able to configure (3) tracks in Audiobus and assign in Garageband coming from H6 and Hyperdrive. I got levels on all tracks and was able to 'record' them'. Though Garageband showed that there was recording going on, the actual audio was not recorded. A small step forward. Audiobus does recognize the H6 though which is something I had not seen before.
The way I've seen it done online was someone using the H5 and Garageband (and no Audiobus) with the camera connection kit and they were able to record individual tracks simultaneously.
All,
I'll pose the question again - what are people using as an interface with the iPad? I'm using the 2018 iPad Pro 12.9'
Audiofuse .. has everything.. including Midi hub
@geophilips said:
I got a Zoom H6 and verified that it works as a multitrack interface in Cubasis. The neat thing is it worked both on batteries and using the USB out as power source.
good info, thanks. This spring I visited a friend who has a H6, to test if it will work or not, but I forgot to bring a mini-USB cable with me. Next time I won't forget the cable, that's for sure.
@Korakios said:
Speaking of Zooms (!) ,the old zoom H2 works thru hub only, and the R16 doesn't work at all ...
Confirmed not working with the R16, just tried it.
edited June 2019
@gmslayton said:
Thats one thing that drives me crazy about the Zoom H4n Pro. It has to be used with a powered usb hub. I don't have the wall wart for it so I cant test that but I would assume since it is battery operated that it work straight into the CCK, nope. I did just discover that if you have the CCK being charged via a USB3 port, it will work but the Zoom still needs batteries.
To clarify, the Zoom H4n still needs a powered USB and batteries to work with CCK or it's ok with batteries and CCK?
Looking at portable audio interfaces for iPad. Want something relatively inexpensive with 4 XLR inputs and can be USB / battery powered. H6 is a bit too expensive.
edited June 2019
@nondes said:
@gmslayton said:
Thats one thing that drives me crazy about the Zoom H4n Pro. It has to be used with a powered usb hub. I don't have the wall wart for it so I cant test that but I would assume since it is battery operated that it work straight into the CCK, nope. I did just discover that if you have the CCK being charged via a USB3 port, it will work but the Zoom still needs batteries.
To clarify, the Zoom H4n still needs a powered USB and batteries to work with CCK or it's ok with batteries and CCK?
Looking at portable audio interfaces for iPad. Want something relatively inexpensive with 4 XLR inputs and can be USB / battery powered. H6 is a bit too expensive.
I've heard about people using a Behringer UMC404HD with a USB power bank (it runs from 5VDC!)
If you choose the power bank 'wisely', you can even mount it inside the UMC404, saving more space.
@rs2000 that is an option since I have 5v DC to USB RipCord, but I want something more compact. And I have umc1820 already.
@nondes said:
@rs2000 that is an option since I have 5v DC to USB RipCord, but I want something more compact. And I have umc1820 already.
Zoom U-44 plus XLR plug-in then?
But it's not exactly compact either.
Yeah, considering u-44 but read a review that said headphone out is not loud enough? Has anyone used it here? It might be closest to what I'm looking for.
edited December 2019
I was testing my H6 today, and while the MultiTrack definitely shows up in AUM, i don’t hear anything playing on the selected Channel. I can only hear audio when it’s set to Stereo Mix on the H6.
What are you all doing in AUM when the H6 is set to MultiTrack in order to get the audio to stream into the AUM Channel?
I’m plugging the H6 into the official Apple Camera Connection kit on my USB-C era iPad Pro.
Thanks for the help.
edited December 2019
@auxmux said:
Yeah, considering u-44 but read a review that said headphone out is not loud enough? Has anyone used it here? It might be closest to what I'm looking for.
ive been using u44 for a couple years now, i mean u kinda end up turning it up most of the way but ive never been dissapointed or needed max volume YMMV
It is pretty compact for my purposes, it fits just about every bag I have and the XLR attachment is easy to remove and small enough to ride along. Its pretty big all connected up tho, but meh. I love it mostly for the battery operation and the upward facing jacks. very convenient
@echoopera said:
I’m plugging the H6 into the official Apple Camera Connection kit on my USB-C era iPad Pro.
it may be better to use a USB-C hub. Then you can attach more then one device.
@Phil999 said:
@echoopera said:
I’m plugging the H6 into the official Apple Camera Connection kit on my USB-C era iPad Pro.
it may be better to use a USB-C hub. Then you can attach more then one device.
But this won’t solve my multi track problem. I’ve plugged it into a hub and still no multitrack support on iPadOS. 🤔
you may have done it already, but just to be sure, go into H6's menu and configure as USB device. It should ask for it when connecting anyway, so I guess this is not the problem. Then, I think, in certain apps like Auria and others, it should be recognised with multiple outputs.
Thanks yeah it sounds like it might only work in AP.
Well did some more testing. I can only get Stereo Mix to work for me when routing audio from the H6 to my usb-c iPad Pro. Multitrack just shows up as Channels in AUM, but no audio is plumbed thru so i can’t record any audio via MT on the iPad.
My hope was to get MT working in AUM to record a couple synths and mics connected to the H6...guess it’s one take a time for now.
If anyone can offer some insight, would greatly appreciate it 👊🏼™️
🤔 I use my H6 in multitracking mode with my iPad.
H6 (using pc/Mac mode for audio interface) > usb cable > either..... camera connection into iPad (but that’ll drain the battery) or more often than not > powered usb hub > usb camera connection > iPad.
Sometimes there’s some weirdness in set up order which means I need to unplug / plug / power on/off to get it to show up in say AUM.