TeamViewer is a very useful application. With it, you can remotely control a computer no matter where you are, as long as you do it over the Internet. This application is useful to give support if a customer needs it or if you want to help a family member who is far away and does not have much knowledge to solve their problem. Now, get the solution of TeamViewer detected commercial use.

1. There are some tutorials or tricks on the internet teach you how to bypass this Commercial use suppected. Most of them are relating to changing MAC address of your computer, uninstall and delete some folder created by TeamVIewer. But that's old tricks and didn't work anymore.
2. 🔔 Subscribe and press the bell so you don't miss the important videos that might help you.🔴NEW SOLUTION HEREEasy steps on how to solve.

I have the same experience. I'm not a business user and have no company. But take over some PC's for old folks with computer problems. Now with latest teamviewer connection was broken and a message appeared that I was suspected of commercial use!!!!! If teamviewer have gone that bad I'll search for alternatives instead like.Third Party Product. As you know, TeamViewer is a good software for remote control/ remote computer access. But it's not free, if you use it many times, you may get a commercial use detected or suspected announcement every time you try to connect. In that case you need to decide to purchase a license to use it more.

Solution of the TeamViewer detected commercial use

This error is normal to appear using a more current version or more outdated because regardless of the version you have. The error can appear in any of them, such as TeamViewer 9, TeamViewer 10, TeamViewer 11, TeamViewer 12 or TeamViewer 13. The normal thing is that if you make an exhaustive use of TeamViewer you may find yourself with the message ” commercial use suspected”.

If you install the application, you will be asked a question to know for what purposes you are going to use the program. That is if you will use it for commercial use or non-commercial private use. Therefore, if you have added several devices to your account, the message will begin to appear.

This usually occurs to people who use their account too much and have several remote devices linked. For this reason, you will begin to receive this message quite often, and in a few minutes, you will close the session.

Detected commercial use TeamViewer

To solve the problem, what you should do is uninstall TeamViewer from your computer and use CCleaner to remove any traces that were ever installed on it. If possible, it would be advisable to restart the router to have another IP address.

Once you restart the computer, you will have everything ready to reinstall the program. Keep in mind that you should not use the same email. Everything has to be completely different so that the message of Detected commercial use of TeamViewer no longer appears.

The problem with the issue of buying licenses is that they have a high price and are not exactly available to many people. It is important to learn how to use this method correctly. Every time you have a problem with that message, the only thing you will have to do to solve it is simply to repeat the steps I mentioned earlier.

As you can see, the solution is not at all complicated, and at the most, it will take you about ten minutes. It is worth considering that this message is considerably annoying. As always in case you have any kind of doubt with this method to solve the message ” TeamViewer detected commercial use 2018 ” you can leave it a little lower, in the comments section.

MAC address（Media Access Control Address）Literal translationMedia Access Control AddressAlso known asLAN address（LAN Address），Ethernet address(Ethernet Address) orPhysical addressPhysical Address, which is an address used to confirm the location of devices on the Internet. In the OSI model, the third layer is responsible for IP address, while the second layer is responsible for MAC address. MAC address is used to uniquely label a network card in the network. If a device has one or more network cards, each network card needs and will have a unique MAC address.

Teamviewer has been tested for commercial use, and it pops up every five minutes. Teamviewer now provides unsealing. I have tried to unsealing and I haven’t received a reply yet…

Official Unseal Look Here Oh

I also downloaded the automatic ID change version of Teamviewer 14 (which seems to work), but I didn’t continue to use it for security reasons. Here I try to modify the Mac address to solve the business restrictions of Teamviewer.

NIC type

Network card is divided into wired network card and wireless network card. The Mac address of wired network card is easy to modify, but the Mac address of wireless network card is slightly troublesome. Because I use a notebook, I should use a wireless network card. The Mac addresses of the wired and wireless network cards are modified as follows.

Mac Address Modification of Cable Network Card

Call the command line window and type the “ipconfig/all” command to view the information of the wired network card. Its header is the Ethernet adapter ethernet. Some information about VMware or virtaulbox may be listed here, which also starts with the Ethernet adapter. Pay attention to the distinction. The red box on the way is the Mac address. Next, let’s modify it.

Teamviewer Commercial Use Detected Change Mac Download

1. Open Manager (Device Manager)
2. Find Network adapters
3. Find the wired network card, the name can see the description shown in the command line window above. My wired network card name is Realtek PCIe GBE Family Controller.
4. Right-click the item of the cable network card and select Properties.
5. Select the Advance tab from the pop-up window
6. Find Network Address in the list
7. Select Value in the radio box and fill in a suitable value (12 digits or letters, no -) to save.
8. Let me take 000C29E7B28C as an example. If you re-execute “ipconfig/all” in cmd, you will see that the Mac address of the cable network card has been changed.

Modification of Wireless Network Card

The modification step of wireless network card is actually one step more than that of wired network card to write registry.

The red box in the picture is my wireless network card, but when you go into the Advance tab of Properties, you will find that you can’t find the Network Address item. You need to add this item here by writing a registry.

1. win + r -> cmd -> regedit
2. Navigate to

1. Expanding this directory will see many folders, such as 0000,0001,0003…
2. Here you need to find two folders of wireless network card and wired network card. You can click on the folder and see the name of the adapter model displayed in the right-hand window, which corresponds to your wired network card or wireless network card (each machine may be different).
3. Here my wireless network card is 0001 folder, and my wired network card is 0002 folder.
4. In the wireless network card (in my case, under the 0001 folder) of the “Ndi” of the “Params” folder, right-click to create a new key, called “Network Address”
5. Next, we need to go to the directory of the network card (in my case, under the folder 0002) and find the value under the key of the network Address, which corresponds to the directory of the wireless network card (in my case, under the folder 0001). New is created by right-clicking new – > String Value in the right panel

Teamviewer Commercial Use Detected Change Macbook

The next step is to go back to the Manager, right-click Properties, Advance, find Network Address, and fill in Value.
Note: The netizens here say that the characters filled in by Mac address must use 2, 6, A or E for the second character, otherwise it will not succeed!But I don’t seem to have met.

After saving, CMD can use “ipconfig/all” to see the successful modification of the Mac address of the wireless network card.

Teamviewer Commercial Use Detected Change Macbook

Teamviewer Solves Business Restrictions

Teamviewer Commercial Use Detected Change Mac Address

1. To uninstall the Teamviewer application, it’s best to remove the settings as well.
2. Delete the registry information of Teamview, I am afraid of residual, direct Ctrl + f, search all the registry information of TeamViewer, have been deleted.
3. After restarting, first modify the Mac address and reinstall Teamviewer.

Teamviewer Commercial Use Detected Change Mac Os

So far, the restriction of Teamviewer has been solved, but it is a bit troublesome to re-modify the Mac address every time. (alas!) If you can unpack it or go unpack it, I am going to connect to the Linux server will be limited. Official Unseal Look Here Oh